language
Product Detail
Product Usage：
1. 2 way normally closed solenoid valve,Closed when de-energized, open when energized.
2. Serialized products, small in size, large flow rate,widely use.
3. Flow as the arrow , mounts in any position, the best solenoid position in vertical and upward direction
The main technical parameters
|
Fluid Media |
Air, gas, water, oil, etc. |
|
Body Material |
forged brass or stainless steel |
|
Seals Material |
NBR;EPDM;VITON |
|
Operating Pressure |
0-8 Bar |
|
Ambient Temperature |
0-65℃； Medium Temperature：0-100℃ |
|
Available Voltage |
AC220V/50Hz；AC110V/50Hz; DC24V; DC12V Voltage can be customized |
Dimensions
Valve Selection Sample
|
2W |
160 |
15 |
K |
V |
AC220V |
|
l |
l |
l |
l |
l |
l |
|
2Way |
Orifice |
Pipe size |
Blank: Normally closed |
Blank: NBR |
Available voltage |
|
Direct acting |
|
|
K: Normally open |
V: viton |
AC110V/AC220V/DC24V/ Contact the Factory for Other |
Valve Selection List (Normally closed type)
|
Pipe Size |
Orifice
mm
|
CV Factor |
Min pressure (Mpa) |
MAX pressure (Mpa) |
Dimensions A×B×H |
Model code
|
|
|
AC220V |
DC24V |
||||||
|
1/8” |
2.5 |
0.23 |
0 |
0.8 |
0.8 |
40×30×75 |
2W025-06-AC220V |
|
1/4” |
2.5 |
0.23 |
0 |
0.8 |
0.8 |
40×30×75 |
2W025-08-AC220V |
|
3/8” |
4 |
0.6 |
0 |
0.8 |
0.5 |
47×32×85 |
2W040-10-AC220V |
|
3/8” |
16 |
4.8 |
0 |
0.7 |
0.5 |
69×57×106 |
2W100-15-AC220V |
|
1/2” |
16 |
4.8 |
0 |
0.7 |
0.5 |
69×57×106 |
2W160-15-AC220V |
|
3/4” |
20 |
7.6 |
0 |
0.7 |
0.5 |
73×57×114 |
2W200-20-AC220V |
|
1” |
25 |
12 |
0 |
0.7 |
0.5 |
99×77×121 |
2W250-25-AC220V |
|
1 1/4” |
32 |
24 |
0 |
0.7 |
0.5 |
112×87×150 |
2W350-35-AC220V |
|
1 1/2” |
40 |
40 |
0 |
0.7 |
0.5 |
123×94×160 |
2W400-06-AC220V |
|
2” |
50 |
50 |
0 |
0.7 |
0.5 |
165×120×176 |
2W500-50-AC220V |
Dimensions
(Normally open type)
|
Pipe Size |
Orifice
mm
|
CV Factor |
Min pressure (Mpa)
|
MAX pressure (Mpa) |
Dimensions A×B×H |
Model code
|
|
|
AC220V |
DC24V |
||||||
|
3/8” |
16 |
4.8 |
0 |
0.5 |
0.5 |
69×57×135 |
2W100-15K-AC220V |
|
1/2” |
16 |
4.8 |
0 |
0.5 |
0.5 |
69×57×135 |
2W160-15K-AC220V |
|
3/4” |
20 |
7.6 |
0 |
0.5 |
0.5 |
73×57×142 |
2W200-20K-AC220V |
|
1” |
25 |
12 |
0 |
0.5 |
0.5 |
99×77×150 |
2W250-25K-AC220V |
|
1 1/4” |
32 |
24 |
0 |
0.5 |
0.5 |
112×87×186 |
2W350-35K-AC220V |
|
1 1/2” |
40 |
40 |
0 |
0.5 |
0.5 |
123×94×197 |
2W400-40K-AC220V |
|
2” |
50 |
50 |
0 |
0.5 |
0.5 |
165×120×225 |
2W500-50K-AC220V |
Remarks:
1: Nitrile butadience rubber (NBR)
Suitable for most gases, liquids, light oils, etc.; medium temperature can be used at -18℃ to 80℃
2: EPDM (EPDM)
Mainly used in places above the NBR temperature range, (such as hot water, low-pressure steam), it is also suitable for most gases, liquids, light oil, etc.; the medium temperature can be used at -20℃ to 139℃
3: Viton (VITON)
Mainly used in places above the temperature range of NBR and EPDM (such as hot water, low pressure steam), it is also suitable for most gases, liquids, light oil, etc.; the medium temperature can be used at -20℃ to 169℃